Dialup access configuration and setup

Below is some information regarding setting up dial-up access for older Windows systems. If you are running a Mac or a version of Windows more recent that 98, you can contact us directly for assistance.

	Double Click 'My Computer' Folder on your PC Desktop
	Double Click 'Dial-up Networking' Folder
	Double click on the 'Make New Connection' Icon
	At this point you are prompted to type in a name for this Connection
	Type in DATEC (PNG) LTD

 It will also prompt you to select a modem
Modem installation Dialogue will be presented if you have not done so
Enter one of the four (4) Dial-in numbers :

	Enter 675 for the area code
	Select Papua New Guinea (675) as the Country code
	Click NEXT
	Click on Finish and the computer will return to the Dial-up Networking Folder.

By now you should have another Icon created for Datec.

	Move the cursor up to Datec Icon and do a Right Mouse Click once
	Select Properties from the Drop-down menu
	Untick Use Country code and Area Code
	Click on the Configure button, and the Modem Configuration Dialogue will appear.
	Click General TAB on top Window, reduce the modem speed to at least 38400
	Click OK to take you back to main DATEC (PNG)LTD Window
	Click on Server Types Tab
	Select 'PPP, Windows 95, Windows NT, Internet' as the Dial-up Server
	Under Advanced options:
	Untick Log onto Network
	Tick Enable Software Compression
	Untick Require encrypted password
	Under Allowed Network Protocols
	Untick NetBUEI
	Untick IPX/SPX Compatible
	Tick TCP/IP
	Click on the TCP/IP Settings Button.
	Select Server Assigned IP Address
	Select Specify Name Server Addresses
	On the Primary DNS, type 202.95.200.3
	On the Secondary DNS, type 202.95.200.131
	Tick Use IP Header Compression
	Tick Use Default Gateway on remote Network
	Click OK
	Click OK
	Close Dial-up Networking Window
	Close My Computer Window